Bixby has many steel buildings: shops on acreage south of town, commercial buildings along Memorial and Highway 64, and storage buildings on larger lots. Bare metal heats quickly in the sun and cools fast at night, which creates condensation.
Water drips onto tools, vehicles, equipment and floors, causing rust and mildew. Fiberglass blankets help until the facing tears, and then condensation returns at the damaged seams.
Closed-cell spray foam bonds directly to the steel, seals panel laps and fasteners, and keeps the metal warm enough that condensation stops. Every building gets a free site visit and a written plan.
Bixby tip
Decide where outlets, lights and any mini split will go before foam goes on. Wiring should be run first.
Signs Your Metal Building Needs Foam
- ✓Dripping roofs on cool mornings
- ✓Rust on tools and fasteners
- ✓A shop too hot to use in summer
- ✓Torn blanket insulation
- ✓Plans to heat or cool the space
- ✓Dust and wind through seams
How Many Inches Does a Metal Building Need?
About 1 inch of closed-cell foam usually stops condensation in an unheated building. No air gap or separate vapor barrier is needed, because the foam bonds directly to the steel.
Heated and cooled shops typically get 1.5 to 3 inches, roughly R-10 to R-20. Many owners put more on the roof than the walls.
Metal Building Insulation Services We Offer
✓Shops and Workshops
Comfortable year-round spaces.
✓Commercial Buildings
Lower energy costs.
✓Storage Buildings
Protecting stored items.
✓New Steel Buildings
Foam before finishes.
✓Thermal Barrier Coatings
Code-required coatings.
Metal Building Insulation Cost in Bixby, OK
| Project | Typical Range | What Affects It |
|---|---|---|
| 30x40 building, about 2 in closed-cell | $5,500–$11,000 | Wall height and doors |
| 40x60 building, about 2 in closed-cell | $10,000–$20,000 | Size and openings |
| Condensation coat, about 1 in | $1.00–$2.00 per sq ft | Surface area |
| Thermal barrier coating | Quoted per project | Use and code |
Planning ranges. Your free estimate measures the actual surfaces.
How It Works
- 1
Site Visit
We review the building and measure.
- 2
Written Plan
Thickness, area and price.
- 3
Install
Foam applied in passes.
- 4
Closeout
Coatings applied where required.