Bixby Reliable Spray Foam Insulation logo Bixby Reliable Spray Foam Insulation
Spray foam insulation being installed in a Bixby, Oklahoma home

Bixby, Oklahoma · Locally owned

Bixby Spray Foam InsulationLocal insulation contractor for Bixby custom homes, crawl spaces, shops and pole barns

Owner Ryan Mitchell and our crew install open-cell and closed-cell spray foam from our shop at 15017 S Grant St. We seal big attics with multiple HVAC systems, insulate vaulted ceilings and new custom homes, encapsulate damp crawl spaces near the river and stop condensation in shops and barns, seven days a week.

  • ✓Free estimates
  • ✓15017 S Grant St, Bixby
  • ✓Open 7 days, 8am–7pm

Get a Free Quote

Tell us about your project and we will get back to you, usually the same business day.

Prefer to talk? Call (918) 398-4304.

✓ Locally owned in Bixby✓ Open-cell and closed-cell foam✓ Open seven days a week✓ Free written estimates

About us

Your Local Spray Foam Insulation Contractor in Bixby

Bixby Reliable Spray Foam Insulation is owned and run by Ryan Mitchell from our shop at 15017 S Grant St. Bixby has changed from a farming town into one of the fastest-growing communities in the Tulsa area, and its homes reflect that: large custom houses along Memorial Drive, newer subdivisions on both sides of the Arkansas River, and acreage with barns and shops south of town.

Those homes bring specific insulation challenges: big attics with more than one HVAC system, vaulted ceilings with shallow rafters, crawl spaces that pick up river humidity, and metal buildings that sweat. Spray foam handles all of them, because it fills every gap, seals air leaks and adds R-value in one application.

Every project starts with a free estimate. We check for moisture, measure the space, explain how many inches of which foam you need, and give you a written quote. When blown-in or fiberglass is the better value, we will tell you.

More about us
Spray foam insulation contractor at work in a Bixby home
Bixby Reliable Spray Foam Insulation logo

Ryan Mitchell

Owner, Bixby Reliable Spray Foam Insulation

Up to R-7

Per inch, closed-cell foam

6

Spray foam services

7 Days

Open 8am to 7pm

Free

Estimates and quotes

Thickness guide

How Many Inches of Spray Foam Do You Need?

The right thickness depends on where the foam goes and which type you use. Closed-cell spray foam has the highest R-value per inch, about R-6 to R-7, while open-cell provides about R-3.5 to R-3.8 per inch at a lower cost. Here are typical targets for Bixby homes and buildings.

LocationOpen-cellClosed-cellNotes
Attic roof deck5.5 to 7 in (about R-20 to R-26)3 to 5 in (about R-18 to R-35)No air gap needed; foam goes directly on the deck
Vaulted ceilingsFills the rafter depth3 to 5 inClosed-cell fits more R-value in shallow rafters
2x4 exterior walls3.5 in (about R-13)2 to 3 in (about R-12 to R-21)Installed after rough-in, before drywall
2x6 exterior walls5.5 in (about R-20)2 to 3 in plus battFlash and batt keeps cost down
Crawl space walls and rim joistsNot recommendedAbout 2 inVapor retarder at about 1.5 in
Metal shops and pole barnsNot recommended on metal1 in for condensation, 1.5 to 3 in if conditionedBonds directly to the steel

See open-cell vs closed-cell for Bixby homes and our guide to insulating vaulted ceilings.

Common technical questions

Vapor Barriers, Air Gaps and Other Spray Foam Questions

Do you need a vapor barrier with spray foam?

Usually not. Closed-cell foam becomes a vapor retarder at about 1.5 inches, and open-cell roof deck and wall assemblies are designed to work in Oklahoma's climate without a plastic barrier. Adding one in the wrong place can trap moisture.

Do you need an air gap with spray foam?

No. Spray foam is applied directly to the roof deck, wall sheathing or metal panel. That full contact is what lets it seal air leaks. Vented attics with fiberglass need air channels at the eaves, but foamed roof decks do not.

Does the foil side of foam insulation go in or out?

That question applies to foil-faced foam board, not spray foam. The foil generally faces an air space so it can work as a radiant barrier. Spray foam has no facing and simply bonds to the surface.

What spray foam do professionals use?

Professional crews use two-component spray foam pumped through a heated proportioning rig and hose, not the canned foam sold at hardware stores. Several major manufacturers make quality foam, and correct temperature and passes matter more than the brand.

Can mold grow behind spray foam insulation?

Foam does not feed mold, but wood behind it can mold if moisture is trapped, usually from a roof leak or wet decking. We check moisture before every job and never spray over wet wood.

Why is spray foam now a red flag?

Some buyers and inspectors worry because roof deck foam hides the decking and bad installs can cause odor or moisture problems. Professional, documented installs are rarely an issue, so we give you written records of the work.

Pricing

Spray Foam Insulation Cost in Bixby

Spray foam insulation cost is based on board feet: the area sprayed times the thickness. Open-cell foam typically runs about $0.45 to $0.80 per board foot installed, and closed-cell about $1.00 to $2.00.

Typical Bixby projects:

  • Roof deck for a 2,000 sq ft single-story house (about 2,300 to 2,600 sq ft of deck), open-cell 5.5 in: about $5,700 to $11,400
  • Roof deck for a large custom home, about 3,500 sq ft of deck: about $8,700 to $15,400
  • Crawl space encapsulation with liner and dehumidifier: about $5,000 to $15,000
  • 30x40 pole barn or shop, about 2 inches of closed-cell: about $5,500 to $11,000
  • New construction 2x6 walls with open-cell, per 1,000 sq ft of wall: about $2,500 to $4,400

Your free estimate gives you an exact written price based on your home or building.

Read the Bixby cost guide

Why choose us

Why Bixby Homeowners Choose Us

Based in Bixby

Ryan Mitchell runs the business from South Grant Street.

Custom Home Experience

Large attics, vaulted ceilings and multiple HVAC systems are routine for us.

Open Seven Days

Call any day from 8am to 7pm, including weekends.

Moisture Checked First

We never spray over wet decking or framing.

Documented Work

Written records of product and thickness for insurers and future buyers.

Honest Recommendations

If another insulation is the better fit, we will say so.

How it works

What to Expect, Start to Finish

1

Free Estimate

We inspect, check moisture and measure.

2

Written Quote

Foam type, inches, area and price in writing.

3

Prep and Spray

We protect your home and spray in proper passes.

4

Cure and Walkthrough

After about 24 hours of curing, we clean up and review the work.

Service area

Spray Foam Insulation Near Me: Bixby and Nearby

We serve all of Bixby, from neighborhoods along Memorial Drive and near Bentley Park to the acreage south of town and homes on both sides of the Arkansas River, plus nearby communities across Tulsa, Creek, Wagoner and Okmulgee counties.

All service areas
Spray foam insulation questions answered for Bixby homeowners

Frequently Asked Questions

Bixby Spray Foam Insulation FAQs

Straight answers to the questions Bixby-area property owners ask us most. Still unsure? Call for a free consultation.

(918) 398-4304
+ How much does spray foam insulation cost for a 2,000 sq ft house?
The roof deck over a 2,000 square foot single-story home is usually 2,300 to 2,600 square feet, so open-cell roof deck foam commonly runs about $5,700 to $11,400. Walls, crawl spaces or closed-cell foam add more. Your free estimate gives the exact price.
+ How many inches of spray foam do you need?
Typically 5.5 to 7 inches of open-cell or 3 to 5 inches of closed-cell on a roof deck, 3.5 to 5.5 inches of open-cell in walls, about 2 inches of closed-cell in crawl spaces, and about 1 inch of closed-cell on metal for condensation control.
+ Which spray foam has the highest R-value?
Closed-cell spray foam, at about R-6 to R-7 per inch, compared with about R-3.5 to R-3.8 for open-cell.
+ Do you need a vapor barrier when using spray foam?
Usually not. Closed-cell foam is a vapor retarder at about 1.5 inches, and open-cell assemblies in Oklahoma are designed to work without a plastic barrier.
+ Do you need an air gap with spray foam insulation?
No. Spray foam is applied directly to the surface, which is what lets it air seal.
+ Why is spray foam insulation now a red flag?
Some buyers and inspectors are cautious because roof deck foam hides the decking and poor installs can cause problems. Professional, documented installation avoids most concerns.
+ Why is it hard to sell a house with spray foam insulation?
It usually is not, when the foam was professionally installed and documented. Keep your invoice and product data sheets.
+ Can mold grow behind spray foam insulation?
Foam does not feed mold, but trapped moisture can affect wood behind it. Checking moisture and fixing leaks before spraying prevents this.
+ What is better than spray foam insulation?
For simple attic floors without ductwork, blown-in insulation is often a better value. For roof decks, walls, crawl spaces and metal buildings, spray foam usually performs best.
+ What is the healthiest insulation for a house?
All common insulation is safe when installed correctly. Spray foam needs about 24 hours to cure before you return, after which it is stable.
+ Do mice chew through closed-cell spray foam?
They can, but they rarely nest in it the way they do in fiberglass, and foam seals many entry gaps.
+ Do you offer free estimates?
Yes. Every project starts with a free estimate and written quote. Call (918) 398-4304 or use the quote form at the top of the page.

Ready for a Free Spray Foam Estimate?

Talk to a locally owned spray foam insulation contractor in Bixby. Get a free estimate and a written quote before any work begins.

Business hours

Mon–Sun 8am–7pm

15017 S Grant St, Bixby, OK 74008

Call now Get a Free Quote